Safe and Low Maintenance Drying of Gases with the SECCANT Regeneration Dryer
| Non-thermal adsorption dryer for NITROGEN |
Free air capacity | Pressure range | ||||
|---|---|---|---|---|---|---|
| Drying | Drying and removal of oil | l/min | m³/h | cfm | bar | |
| SECCANT III | SECCANT III A | 100-1500 | 6-90 | 3,5-53 | 90 – 350 | 350 – 420 |
| SECCANT IV | SECCANT IV A | 1500-3500 | 90-210 | 53-124 | 90 – 350 | 350 – 400 |
| Non-thermal adsorption dryer for HELIUM + ARGON |
Free air capacity | Pressure range | ||||
|---|---|---|---|---|---|---|
| Drying | Drying and removal of oil | l/min | m³/h | cfm | bar | |
| SECCANT III H | SECCANT III AH | 100-1500 | 6-90 | 3,5-53 | 90 – 350 | 350 – 420 |
| SECCANT IV H | SECCANT III AH | 1500-3500 | 90-210 | 53-124 | 90 – 350 | 350 – 400 |
Standard Scope of Supply
- Oil and water separator with automatic condensate drain
- Safety valve adjusted to unit pressure (TÜV certified)
- 2 × filter housings with molecular sieve as a desiccating agent
- 1 × filter housing with activated carbon for oil removal (SECCANT A / AH units only)
- Particle filter 1 µm
- Pressure maintaining valve with a connection for the dryer
- Valve assembly for smooth transition between drying and regeneration phase
- Pressure reducing valve including pressure gauge for the control and regeneration airflow
- Safety valve for the control and regeneration airflow
- Silencer for the regeneration air outlet
- Magnetic valves for system control
- Electronic control B-CONTROL
Optional Accessoiries
- SECURUS Monitoring Device
That monitors the degree of saturation of the drying cartridge and the air and gas quality - Carbon Monoxide Oxidising Cartridge
For the elimination of carbon monoxide (CO) in combination with an activated carbon filter
Combined drying and purification cartridge that removes water vapour, oil residue and CO
Diagram of a Ready-to-run Compressor System
Compression Treatment Storage Distribution
