Guidelines for installation, servicing, safety and storage
Belt tension:
Extensive tension will significantly reduce bearing life and void any warranty coverage.
Installation:
Installation always has to be vertical. Ensure adequate air circulation.
Maintenance:
Valves, bearings und piston rings wear down. The compressor unit must be serviced in regular intervals
Safety instruction:
This product does not constitute a finished product in legal terms. Only after installation and in connection with other components does it form a finished product, e.g. oil less compressor systems. Its proper installation is thus the responsibility of the systems manufacturer. Compressor systems must be installed and operated in accordance with the currently valid safety and accident prevention regulations.
Storage:
Adequate corrosion protection must be applied when the compressor is stored for a longer period. All components must be protected against damage from jolting or impact. Any transportation damage must be dealt immediately with the forwarding agent.
Store in dry rooms without acid vapours, alkalis or other chemicals, 1,5 m (2 yds) away from radiators and at least 0, 2m (8 in.) above storage room floor. The product should not be stored below +20°C (70°F) and above 50% air humidity.
Storage:
The points listed above are the prerequisites for safe operation. If you have additional technical inquiries pleaseget in touch with ROTORCOMP.
The components comply with the latest technical standing. However, in the interest of further technical development, we reserve the right to technical modifications.
